Horseshoe Butterfly~I want this for my garden!!  Use four old horseshoes for the wings, half inch re-bar for the body, cut nails for the antennae (with two small ball bearings welded on) and tail. The post is made from three eighths re-bar.  Use a wire wheel to clean the rust before MIG welding it together. After it cools spray with some clear paint. by shmessa
shmessa
shmessa Horseshoe Butterfly~I want this for my garden!! Use four old horseshoes for the wings, half inch re-bar for the body, cut nails for the antennae (with two small ball bearings welded on) and tail. The post is made from three eighths re-bar. Use a wire wheel to clean the rust before MIG welding it together. After it cools spray with some clear paint.
Favorites
Mount horseshoes to your staircase using horseshoe nails. The older the horseshoe, the luckier it is. | Stylish Western Home Decorating by rachelle
rachelle
rachelle Mount horseshoes to your staircase using horseshoe nails. The older the horseshoe, the luckier it is. | Stylish Western Home Decorating
Home Decorating Ideas
a use for rusty nails..add it to the welding projects by margery
margery
margery a use for rusty nails..add it to the welding projects
Inspiring Interiors
Horseshoes welded together to form hearts. by white girl
white girl
white girl Horseshoes welded together to form hearts.
Diy must do's
Horseshoes welded together to form hearts. by loretta
loretta
loretta Horseshoes welded together to form hearts.
Products I Love
Horseshoes welded together to form hearts. by maria.t.rogers
maria.t.rogers
maria.t.rogers Horseshoes welded together to form hearts.
HEARTS!
Alive??? Cooling Pet PadAlive??? Cooling Pet Pad Compatible Devices   The cool pet pad is a revolutionary new self-cooling pet cushion that  works without refrigeration, water, or electricity. It cools for 3-4  hours of constant use and recharges automatically after a brief period  of non-use. No hassle??filling with water. No mold, no leaks. Place on  the floor, bed, crate, in the car or??outside. It is non-toxic ans safe  for pets, people and the planet. This is cool, you do nothing and your  pet will love you for it. The??COOL PET PAD??is weight or pressure  activated, as soon as your 4 legged friend lies down the cooling effect  starts.??It??will cool for up to 3-4 hours of constant use and will last  for years. It re-charges itself automatically after a brief period of  non-use. The??COOL PET PAD??comforting cushion??cools and soothes and has  aided in the relief of pain, swelling, discomfort and stress, as well as  the following conditions: heat stroke, hip dysplasia, cushing's  disease, allergies, post surgery, skin conditions, post chemotherapy.  It's great for older dogs. It's also incredibly convenient, it folds  easily, wipes clean, is sturdy. Place it on the floor, on the bed, in  the car, or even outside. Your pet will stay so cool, you may decide to  get one for yourself. by Top-product
Top-product
Top-product Alive??? Cooling Pet PadAlive??? Cooling Pet Pad Compatible Devices The cool pet pad is a revolutionary new self-cooling pet cushion that works without refrigeration, water, or electricity. It cools for 3-4 hours of constant use and recharges automatically after a brief period of non-use. No hassle??filling with water. No mold, no leaks. Place on the floor, bed, crate, in the car or??outside. It is non-toxic ans safe for pets, people and the planet. This is cool, you do nothing and your pet will love you for it. The??COOL PET PAD??is weight or pressure activated, as soon as your 4 legged friend lies down the cooling effect starts.??It??will cool for up to 3-4 hours of constant use and will last for years. It re-charges itself automatically after a brief period of non-use. The??COOL PET PAD??comforting cushion??cools and soothes and has aided in the relief of pain, swelling, discomfort and stress, as well as the following conditions: heat stroke, hip dysplasia, cushing's disease, allergies, post surgery, skin conditions, post chemotherapy. It's great for older dogs. It's also incredibly convenient, it folds easily, wipes clean, is sturdy. Place it on the floor, on the bed, in the car, or even outside. Your pet will stay so cool, you may decide to get one for yourself.
Bestseller
MIG welding by opal
opal
opal MIG welding
Favorites
mig welded by natalia
Buzzy Bee Marshmallow Pop Tutorial by TheMarshmallowStudio! *IF* I made these (maybe for a cute "Mommy-to-Bee" baby shower?), I would use the JUMBO marshmallows, and dip them in yellow-tinted white chocolate. Paint black stripes & face with a food-dye marker, and add antennae with black jimmy sprinkles and of course make cute wings out of mini-marshmallows. ADORABLE!! by alfreda
alfreda
alfreda Buzzy Bee Marshmallow Pop Tutorial by TheMarshmallowStudio! *IF* I made these (maybe for a cute "Mommy-to-Bee" baby shower?), I would use the JUMBO marshmallows, and dip them in yellow-tinted white chocolate. Paint black stripes & face with a food-dye marker, and add antennae with black jimmy sprinkles and of course make cute wings out of mini-marshmallows. ADORABLE!!
costume.
The Fab Four, before and after! by cecile
cecile
cecile The Fab Four, before and after!
Perfectly Packaged
christmas tree made from horseshoes | Horse Shoes for the Household - Lucky Shoe Horseshoe Art by shelley
shelley
shelley christmas tree made from horseshoes | Horse Shoes for the Household - Lucky Shoe Horseshoe Art
Wreaths
Jardine 1-14 inch Front Highway Bar Black - Harley Davidson Sportster XL XLH and XLC 84 to 03 - 5016-01BHIGHWAY BARS for HarleyDavidson models have applications dating back to 1958 Timeless style and function. Heavy duty thick wall American steel tubing is formed before serious gauge mounting brackets are MIG welded in place.Note: Will work with the OEM forward controls. by deeshop
deeshop
deeshop Jardine 1-14 inch Front Highway Bar Black - Harley Davidson Sportster XL XLH and XLC 84 to 03 - 5016-01BHIGHWAY BARS for HarleyDavidson models have applications dating back to 1958 Timeless style and function. Heavy duty thick wall American steel tubing is formed before serious gauge mounting brackets are MIG welded in place.Note: Will work with the OEM forward controls.
Hot sellers
Horseshoe shelf brackets- these are so easy with a welder.. I had this idea and Bourguiba shelves from ikea and a friend welded these together for me. As well as used some old horse shoes and their nails to make key rings/ coat hangers to stick on the wall. I love them! by shmessa
shmessa
shmessa Horseshoe shelf brackets- these are so easy with a welder.. I had this idea and Bourguiba shelves from ikea and a friend welded these together for me. As well as used some old horse shoes and their nails to make key rings/ coat hangers to stick on the wall. I love them!
Favorites
Jardine 1-14 inch Front Highway Bar Chrome- Suzuki C50 M50 Boulevard 05-09 - 4001-01HIGHWAY BARS for HarleyDavidson models have applications dating back to 1958 Timeless style and function. Heavy duty thick wall American steel tubing is formed before serious gauge mounting brackets are MIG welded in place.Note: Will work with the OEM forward controls. by deeshop
deeshop
deeshop Jardine 1-14 inch Front Highway Bar Chrome- Suzuki C50 M50 Boulevard 05-09 - 4001-01HIGHWAY BARS for HarleyDavidson models have applications dating back to 1958 Timeless style and function. Heavy duty thick wall American steel tubing is formed before serious gauge mounting brackets are MIG welded in place.Note: Will work with the OEM forward controls.
Hot sellers
Re-done dresser in Valspar paint Seafarer, Rust-Oleum Specialty Metallic Spray Paint in Silver for the drawer pulls by rae
rae
rae Re-done dresser in Valspar paint Seafarer, Rust-Oleum Specialty Metallic Spray Paint in Silver for the drawer pulls
Favorites
Coffee Bar Before and After - Annie Sloan Chalk Paint® by jsavel
jsavel
jsavel Coffee Bar Before and After - Annie Sloan Chalk Paint®
Favorites
Coffee Bar Before and After - Annie Sloan Chalk Paint® by kathleen
kathleen
kathleen Coffee Bar Before and After - Annie Sloan Chalk Paint®
furniture heaven
Sale Price Liquid Bearings 100%-synthetic Oil for roller skates, SUPERIOR lubrication and rust prevention for wheel bearings! online now. by Skate & Skateboard Outdoor Sports 2015
Skate & Skateboard Outdoor Sports 2015
Skate & Skateboard Outdoor Sports 2015 Sale Price Liquid Bearings 100%-synthetic Oil for roller skates, SUPERIOR lubrication and rust prevention for wheel bearings! online now.
Best Cheap Toilets Papers Holders Stores 2015
Biltwell Model B Tail Light Fender Mount - TM-FEN-HV-BKBiltwell offers three different lasercut 18inch 3mm thick steel brackets for custom fabricators who wish to mount the companys Model B taillight in the cleanest manner possible. Two models are designed for welding to the vertical uprights on a sissy bar,with one featuring a surface for installing US motorcycle license plates. The third bracket is a simple round affair that can be bolted to the center of the rear fender or welded to an existing sidemount license plate bracket. This simple steel plate has feet any competent garage mechanic can bend with a torch and crescent wrench to fit the contours of his rear fender. After modifying the plate to stand upright on the fender,simply drill two holes through the fender using the bracket as a guide. Some acorn nuts or button Allen cap screws will complete the install and give you a place to mount your Model B taillight. This is just one home fab application for this precut plate. Clever builders will come up with dozens of other ways to put this piece to good use.Made from lasercut 18inch thick 3mm sheet steel with a matte black electroplate finish for rustresistance.Note: The black electroplate finish is not intended to withstand heat and bending. It is merely plated to protect the raw steel in our warehouse and on your shelf. After tweaking your Model B bracket to fit your fender,we suggest polishing and chroming,or at least a good coat of paint. by deeshop
deeshop
deeshop Biltwell Model B Tail Light Fender Mount - TM-FEN-HV-BKBiltwell offers three different lasercut 18inch 3mm thick steel brackets for custom fabricators who wish to mount the companys Model B taillight in the cleanest manner possible. Two models are designed for welding to the vertical uprights on a sissy bar,with one featuring a surface for installing US motorcycle license plates. The third bracket is a simple round affair that can be bolted to the center of the rear fender or welded to an existing sidemount license plate bracket. This simple steel plate has feet any competent garage mechanic can bend with a torch and crescent wrench to fit the contours of his rear fender. After modifying the plate to stand upright on the fender,simply drill two holes through the fender using the bracket as a guide. Some acorn nuts or button Allen cap screws will complete the install and give you a place to mount your Model B taillight. This is just one home fab application for this precut plate. Clever builders will come up with dozens of other ways to put this piece to good use.Made from lasercut 18inch thick 3mm sheet steel with a matte black electroplate finish for rustresistance.Note: The black electroplate finish is not intended to withstand heat and bending. It is merely plated to protect the raw steel in our warehouse and on your shelf. After tweaking your Model B bracket to fit your fender,we suggest polishing and chroming,or at least a good coat of paint.
Hot sellers
Klock Werks Tire Hugger Front Fender Shank Style Black For 23 Inch Front Wheel W Raked Tree- Harley FLHT FLHR FLHX 14- Up - 050102482014Show off your front wheel by choosing one of Klock Werks Tire Hugger Series front fenders Our 14gauge steel fenders are direct bolton replacements that require no drilling or modifications to install,thanks to the use of precision deepdraw stamping technology that ensures a consistently smooth and flawless finish every time,and 5axis laser cutting that ensures acurate fitment. These high end processes will save you money at the paint booth,and time when installing We then take the manufacturing process one step further by ECoating our fenders to prevent rust and corrosion. Klock Werks sheetmetal leads the industry in quality. The 14gauge steel is thick enough to add rigidity to the frontend by acting like a fork brace,but it can still be cut or shaped for a more kustom appearance if desired. Made in the USA.Highest quality fenders on the market,period.Fitments available for 16,17,18,19 and 21 front wheels.NEW styles to choose from: The Pierce,The Aero,and The Jai Alai.21 fender styles measure 5.875 outside width and will fit the current 12021 series tires on 3 to 312 wide rims.16171819 fender styles measure 6.25 outside width and will accommodate 130 series front tires.Fits 19 wheels when equipped with 1306019 series front tire only.Stamped from 14Gauge Steel,not spun or welded together,resulting in the ultimate smooth longlasting fender.Use of 5axis laser ensures a precision cut and finish every time.ECoated for rust and corrosion resistance.All fenders come predrilled for easy installation.Requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks,sold separately see below.Fits 19842014 FLT,FLHT,FLHX,FLHR,FLTR,HD FL Trike Models2014 Models require a special mounting kit available now Use the 2014 Mounting Kits listed below to install any of the fenders displayed here on a 2014 touring model. See options below...The Uncut and Swoop styles are now discontinued,available while supplies lastSale pricing applies to select models only.Made in the U.S.A. by deeshop
deeshop
deeshop Klock Werks Tire Hugger Front Fender Shank Style Black For 23 Inch Front Wheel W Raked Tree- Harley FLHT FLHR FLHX 14- Up - 050102482014Show off your front wheel by choosing one of Klock Werks Tire Hugger Series front fenders Our 14gauge steel fenders are direct bolton replacements that require no drilling or modifications to install,thanks to the use of precision deepdraw stamping technology that ensures a consistently smooth and flawless finish every time,and 5axis laser cutting that ensures acurate fitment. These high end processes will save you money at the paint booth,and time when installing We then take the manufacturing process one step further by ECoating our fenders to prevent rust and corrosion. Klock Werks sheetmetal leads the industry in quality. The 14gauge steel is thick enough to add rigidity to the frontend by acting like a fork brace,but it can still be cut or shaped for a more kustom appearance if desired. Made in the USA.Highest quality fenders on the market,period.Fitments available for 16,17,18,19 and 21 front wheels.NEW styles to choose from: The Pierce,The Aero,and The Jai Alai.21 fender styles measure 5.875 outside width and will fit the current 12021 series tires on 3 to 312 wide rims.16171819 fender styles measure 6.25 outside width and will accommodate 130 series front tires.Fits 19 wheels when equipped with 1306019 series front tire only.Stamped from 14Gauge Steel,not spun or welded together,resulting in the ultimate smooth longlasting fender.Use of 5axis laser ensures a precision cut and finish every time.ECoated for rust and corrosion resistance.All fenders come predrilled for easy installation.Requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks,sold separately see below.Fits 19842014 FLT,FLHT,FLHX,FLHR,FLTR,HD FL Trike Models2014 Models require a special mounting kit available now Use the 2014 Mounting Kits listed below to install any of the fenders displayed here on a 2014 touring model. See options below...The Uncut and Swoop styles are now discontinued,available while supplies lastSale pricing applies to select models only.Made in the U.S.A.
Hot sellers
How to use regular spray paint to revitalize the fabric on your faded outdoor cushions and pillows--before and after! by DeeDeeBean
DeeDeeBean
DeeDeeBean How to use regular spray paint to revitalize the fabric on your faded outdoor cushions and pillows--before and after!
Beautiful Selection
Thepitt TP685 4-Gang Masonry Box 2-1/2 Inch Depth, Steel, 62 Cubic-Inch, Natural, Thepitt 4-Gang Masonry box is constructed from natural finish, corrosion resistant welded steel for long lasting durability. Masonry box with 62 cubic inches capacity is designed to accommodate mounted switches or other devices. It allows for creating a multiple gang box from a single gang box by simply removing the combo head screw holding the side with a size 2 bit and connects two boxes together by re-using the screws. Masonry box includes four knockouts for accommodating wire/cables and can by newprice0102
newprice0102
newprice0102 Thepitt TP685 4-Gang Masonry Box 2-1/2 Inch Depth, Steel, 62 Cubic-Inch, Natural, Thepitt 4-Gang Masonry box is constructed from natural finish, corrosion resistant welded steel for long lasting durability. Masonry box with 62 cubic inches capacity is designed to accommodate mounted switches or other devices. It allows for creating a multiple gang box from a single gang box by simply removing the combo head screw holding the side with a size 2 bit and connects two boxes together by re-using the screws. Masonry box includes four knockouts for accommodating wire/cables and can
bestblackfriday
When doing your nails, use Elmer's glue around your nail, let it dry, go crazy with paint, and then peel off the glue. WHY HAVE I NEVER HEARD OF THIS BEFORE?! by brooklyn_fox
brooklyn_fox
brooklyn_fox When doing your nails, use Elmer's glue around your nail, let it dry, go crazy with paint, and then peel off the glue. WHY HAVE I NEVER HEARD OF THIS BEFORE?!
future reference
When doing your nails, use Elmer's glue around your nail, let it dry, go crazy with paint, and then peel off the glue. WHY HAVE I NEVER HEARD OF THIS BEFORE?! by evangeline
evangeline
evangeline When doing your nails, use Elmer's glue around your nail, let it dry, go crazy with paint, and then peel off the glue. WHY HAVE I NEVER HEARD OF THIS BEFORE?!
Crafty Stations
Clean your microwave by placing a glass bowl filled with 1/4 cup vinegar and 1 cup water inside and heating it for five minutes on the highest setting. After the mixture cools, use a cloth dipped in it to wipe off splattered food stains by marcie
marcie
marcie Clean your microwave by placing a glass bowl filled with 1/4 cup vinegar and 1 cup water inside and heating it for five minutes on the highest setting. After the mixture cools, use a cloth dipped in it to wipe off splattered food stains
Crafts and OCD Organization
A Beautiful Cross made from Horseshoes welded together. on Etsy, $45.00 by tommie
tommie
tommie A Beautiful Cross made from Horseshoes welded together. on Etsy, $45.00
Home Ideas
A Horseshoes Post - House of Joyful Noise (A Cute Way To Use Horseshoes) by millicent
millicent
millicent A Horseshoes Post - House of Joyful Noise (A Cute Way To Use Horseshoes)
inspiring words of wisdom
Cinderella before & after the ball...love it! by sweetspiriteva
sweetspiriteva
sweetspiriteva Cinderella before & after the ball...love it!
Favorites
Cinderella before & after the ball...love it! by yvette
yvette
yvette Cinderella before & after the ball...love it!
PARTAY
Buy 100Amp 10-ft MIG Welding Torch Replacement for Miller M-100 MIG Gun 248282 by Phome
Phome
Phome Buy 100Amp 10-ft MIG Welding Torch Replacement for Miller M-100 MIG Gun 248282
Shopping Bestseller.